Solar Modules


The series SOLARION M210 is a new generation of solar modules. The frameless encapsulation of solar cells between TPO or PVC and glass provides maximum mechanical stability, durability and ease of use for roofing applications, becoming a revolutionary solution for implementation. The fast and easy apllication of the OC3 AG modules will change the solar roof market in an astonishing way. With a size of about 1600 mm to 1200 mm and a weight of about 12 kg the modules can be installed easily. The 2mm front glass is tempered and very resistant to hail and other mechanical impacts. The modules are certified according to the standards of IEC 61215 and IEC 61730 

www.solarion.de
Technical Data








Performance*
Performance at standard test conditions (STC: 1000 W/m2, 25 °C, spectrum AM 1.5 G)
Nominal power Pmax
[W]
200
210
220
Power sorting of Pmax
[W]
195.0 – 204.9
205.0 – 214.9
215.0 – 224.9
Voltage at maximum power Vmpp
[V]
24.5
25.0
25.1
Current at maximum power Impp
[A]
8.16
8.40
8.76
Open circuit voltage Voc
[V]
31.2
31.7
31.8
Short circuit current Isc
[A]
9.20
9.37
9.43
Performance at nominal operating cell temperature (NOCT: 800 W/m2, 46 ± 2 °C, spectrum AM 1.5 G)
Nominal power Pmax
[W]
146.2
153.5
160.8
Nominal voltage Vmpp
[V]
22.2
22.7
22.7
Current at maximum power Impp
[A]
6.59
6.78
7.07
Open circuit voltage Voc
[V]
29.2
29.7
29.8
Short circuit current Isc
[A]
7.42
7.56
7.61
Weak light performance: typical efficiency @ 200 W/m² is 0.95 x the efficiency @ 1000 W/m²
Temperature effects
Temperature coefficient of Pmax
-0.45 %/K
Temperature coefficient of Voc
-0.30 %/K
Temperature coefficient of Isc
+0.004 %/K
Operating limits
Maximum system voltage
1000 V
Ambient temperature range
-40 … +45 °C
Max. mechanical load
2400 Pa
Hail resistance
25 mm at 83 km/h
Max. reverse current
20 A
Mechanical characteristics
Module technology
synthethic roofing membrane backsheet (PVC or TPO) – EVA adhesive – plastic module backsheet – EVA encapsulant - solar cells – EVA encapsulant – 3 mm tempered front glass
Number and type of solar cells
6 x 8 pieces monocrystalline silicon
Dimensions (L x W x D)
1600 mm x 1200 mm x 6.4 mm (35 mm including junction box)
Weight
16.6 kg (8.65 kg/m²)
Junction box
on module front side, protection class IP 65
Output terminals
junction box with two cables 4 mm², 1 m each, HC 4 Connectors
Minimum bending ratio
1° / m

* Tolerances: Nominal Power Pmax ± 2 %, other Electrical Parameters ± 5 %
Solarion M210T Installation Manual / pdf
Solarion M210


Latest News
What’s happening at OC3 AG
  • Solarion AG have been acquired by OC3 AG

  • OC3 AG is aiming to become energy oriented technology leader in Europe with its solar applications

  • OC3 AG will reach 40MW/year capacity by the end of 2016

  • Solarion brand is getting a facelift


Applications
Custom Solutions
  • Thin film battery

    Thin Film Battery is the one of the emerging technology product of thin film research. Vacuum coating technologies allow this kind of solid state thin film batteries to be produced.

  • Electrochromic Foils

    Electrochromic devices can change color by applying electrical voltage. These devices work similarly to batteries.Semiconducting materials such as WO3 and NiO are used to form anode and cathode of electrochromic cells.

  • CIGS Solar Cell

    OC3 AG develops and produces thin-film solar cells and modules employing a patented ion beam-assisted manufacturing process that deposits a thin layer of copper indium gallium selenide (CIGS) on the lightest substrate available at reduced deposition temperature.

  • PDLC

    PDLC devices can change scattering of light by applying electrical voltage.Usually polymer dispersed liquid crystal materials are sandwiched between sputtered ITO-PET films

  • Solar Modules

    OC3 AG thin-film battery technology is a new concept of extremely thin, rechargeable solid-state batteries with fast constant-voltage recharge